Goldline Be1 Battery Eliminator/Power Supply (3.5 Mm Phone Plug, Tip Positive)
Goldline's PWN1 Personal White Noise Generator produces an adjustable audible random sound with an equal amount of energy per Hertz (Hz) of bandwidth, normally referred to as "White Noise". This sound can be used to acoustically mask a selected environment. Acoustic masking is where a low-level background sound is added to an area in order to:The PWN1 has a built-in speaker which allows the user to put background noise wherever he/she wants. Place the Noise Generator right next to you on a desk or table or on the other side of the room. The volume control permits the injection of only as much noise as is needed. The idea is not to overpower the offending noise or conversation but to inject just enough random sound to make it less distracting. The noise signal can also be patched into a sound system through the 1/4” output jack. This would allow for a broader reaching noise pattern.Care should be taken when doing this as too high a noise signal input could result in damage to the sound system. White noise produces much more high frequency noise than low frequency noise and could damage tweeter speakers at elevated levels. Many people mistakenly believe that their 1000W speakers can't be damaged with their 250W amplifiers - until they find the tweeters were rated for 100W. Always start with the gain control of the PWN1 at its lowest position when powering up a sound system.The PWN1 can be powered with a standard 9 Volt battery or can be powered with the battery eliminator provided. Plugging the BE1 battery eliminator into the PWN1 disconnects the battery (if installed) from the circuit so that only the BE1 is actively powering the PWN1.NOTE:There is no provision for the recharging of batteries in the PWN1.This product carries a 1 year warranty for manufacturing defects.FeaturesMake other noise coming into an area less distracting orReduce the chance of overhearing adjacent conversations orReduce the chance of having your conversation overheard by someone else.Aid in alleviating the effects of tinnitus by providing a low-level broad-band noise to help achieve the "habituation" of tinnitus.Specifications:Output: Signal out - unbalanced 1/4" jack, impedance of 620 ohms.Output Level: Line output: -36dBu to +13dBu Speaker output: 30dBa SPL to 72dBa SPL @ 1 meterFrequency Range: 25Hz - 20kHzPower Requirements:- Internal: 9V battery. To access, slide back plastic cover on rear of case.- External: 12Vdc @ 200mA via 3.5mm jack (Model BE1 supplied)Emissions: FCC Class B - EN 55022 BImmunity: - EN 55024 BSize: 3" W x 5.5" H x 1.75" DWeight: 7 oz.Case Material: High impact ABS Goldline PWN1 Personal White Noise Generator.
Price now:
From
$57.35
To
$239.97
Price History:
Details:Goldline Be1 Battery Eliminator/Power Supply (3.5 Mm Phone Plug, Tip Positive)
Goldline's PWN1 Personal White Noise Generator produces an adjustable audible random sound with an equal amount of energy per Hertz (Hz) of bandwidth, normally referred to as "White Noise". This sound can be used to acoustically mask a selected environment. Acoustic masking is where a low-level background sound is added to an area in order to:The PWN1 has a built-in speaker which allows the user to put background noise wherever he/she wants. Place the Noise Generator right next to you on a desk or table or on the other side of the room. The volume control permits the injection of only as much noise as is needed. The idea is not to overpower the offending noise or conversation but to inject just enough random sound to make it less distracting. The noise signal can also be patched into a sound system through the 1/4” output jack. This would allow for a broader reaching noise pattern.Care should be taken when doing this as too high a noise signal input could result in damage to the sound system. White noise produces much more high frequency noise than low frequency noise and could damage tweeter speakers at elevated levels. Many people mistakenly believe that their 1000W speakers can't be damaged with their 250W amplifiers - until they find the tweeters were rated for 100W. Always start with the gain control of the PWN1 at its lowest position when powering up a sound system.The PWN1 can be powered with a standard 9 Volt battery or can be powered with the battery eliminator provided. Plugging the BE1 battery eliminator into the PWN1 disconnects the battery (if installed) from the circuit so that only the BE1 is actively powering the PWN1.NOTE:There is no provision for the recharging of batteries in the PWN1.This product carries a 1 year warranty for manufacturing defects.FeaturesMake other noise coming into an area less distracting orReduce the chance of overhearing adjacent conversations orReduce the chance of having your conversation overheard by someone else.Aid in alleviating the effects of tinnitus by providing a low-level broad-band noise to help achieve the "habituation" of tinnitus.Specifications:Output: Signal out - unbalanced 1/4" jack, impedance of 620 ohms.Output Level: Line output: -36dBu to +13dBu Speaker output: 30dBa SPL to 72dBa SPL @ 1 meterFrequency Range: 25Hz - 20kHzPower Requirements:- Internal: 9V battery. To access, slide back plastic cover on rear of case.- External: 12Vdc @ 200mA via 3.5mm jack (Model BE1 supplied)Emissions: FCC Class B - EN 55022 BImmunity: - EN 55024 BSize: 3" W x 5.5" H x 1.75" DWeight: 7 oz.Case Material: High impact ABS Goldline PWN1 Personal White Noise Generator.
Price now:
From
$57.35
To
$239.97
This site contains affiliate links for which we may be compensated.
Full Compass Systems
0.00% (~ $$v)
New
$57.35
Full Compass Systems | $57.35Free Delivery | Store |
Full Compass Systems | $239.97Free Delivery | Store |
Product Description
Goldline's PWN1 Personal White Noise Generator produces an adjustable audible random sound with an equal amount of energy per Hertz (Hz) of bandwidth, normally referred to as "White Noise". This sound can be used to acoustically mask a selected environment. Acoustic masking is where a low-level background sound is added to an area in order to:The PWN1 has a built-in speaker which allows the user to put background noise wherever he/she wants. Place the Noise Generator right next to you on a desk or table or on the other side of the room. The volume control permits the injection of only as much noise as is needed. The idea is not to overpower the offending noise or conversation but to inject just enough random sound to make it less distracting. The noise signal can also be patched into a sound system through the 1/4” output jack. This would allow for a broader reaching noise pattern.Care should be taken when doing this as too high a noise signal input could result in damage to the sound system. White noise produces much more high frequency noise than low frequency noise and could damage tweeter speakers at elevated levels. Many people mistakenly believe that their 1000W speakers can't be damaged with their 250W amplifiers - until they find the tweeters were rated for 100W. Always start with the gain control of the PWN1 at its lowest position when powering up a sound system.The PWN1 can be powered with a standard 9 Volt battery or can be powered with the battery eliminator provided. Plugging the BE1 battery eliminator into the PWN1 disconnects the battery (if installed) from the circuit so that only the BE1 is actively powering the PWN1.NOTE:There is no provision for the recharging of batteries in the PWN1.This product carries a 1 year warranty for manufacturing defects.FeaturesMake other noise coming into an area less distracting orReduce the chance of overhearing adjacent conversations orReduce the chance of having your conversation overheard by someone else.Aid in alleviating the effects of tinnitus by providing a low-level broad-band noise to help achieve the "habituation" of tinnitus.Specifications:Output: Signal out - unbalanced 1/4" jack, impedance of 620 ohms.Output Level: Line output: -36dBu to +13dBu Speaker output: 30dBa SPL to 72dBa SPL @ 1 meterFrequency Range: 25Hz - 20kHzPower Requirements:- Internal: 9V battery. To access, slide back plastic cover on rear of case.- External: 12Vdc @ 200mA via 3.5mm jack (Model BE1 supplied)Emissions: FCC Class B - EN 55022 BImmunity: - EN 55024 BSize: 3" W x 5.5" H x 1.75" DWeight: 7 oz.Case Material: High impact ABS Goldline PWN1 Personal White Noise Generator.
Product Specifications
General | |
|---|---|
Size | 12 |
Brand | Goldline |
Color | white |
Material | plastic |
Delivery, Returns & Refunds
Delivery
Sellers offer a range of delivery options, so you can choose the one that’s most convenient for you. Many sellers offer free delivery. You can always find the postage cost and estimated delivery date in a seller’s listing. You'll then be able to see a full list of delivery options during checkout. These can include: Express delivery, Standard delivery, Economy delivery, Click & Collect, Free local collection from seller.
Returns
Your options for returning an item vary depending on what you want to return, why you want to return it, and the seller's return policy. If the item is damaged or doesn't match the listing description, you can return it even if the seller's returns policy says they don't accept returns. If you've changed your mind and no longer want an item, you can still request a return, but the seller doesn't have to accept it. If the buyer changes their mind about a purchase and wants to return an item, they may need to pay return postage costs, depending on the seller's return policy. Sellers can provide a return postage address and additional return postage information for the buyer. Sellers pay for return postage if there's a problem with the item. For example, if the item doesn't match the listing description, is damaged or defective or is counterfeit. By law, customers in the European Union also have the right to cancel the purchase of an item within 14 days beginning from the day you receive, or a third party indicated by you (other than the carrier) receives, the last good ordered by you (if delivered separately). This applies to all products except for digital items (e.g. Digital Music) that are provided immediately to you with your acknowledgment, and other items such as video, DVD, audio, video games, Sex and Sensuality products and software products where the item has been unsealed.
Refunds
Sellers have to offer a refund for certain items only if they are faulty, such as: Personalized items and custom-made items, Perishable items, Newspapers and magazines, Unwrapped CDs DVDs and computer software. If you used your PayPal balance or bank account to fund the original payment, the refunded money will go back to your PayPal account balance. If you used a credit or debit card to fund the original payment, the refunded money will go back to your card. The seller will effect the refund within three working days but it may take up to 30 days for Paypal to process the transfer. For payments funded partially by a card and partially by your balance/bank, the money taken from your card will go back to your card and the remainder will return to your PayPal balance.