Rode Blimp R
The RØDE Blimp is a complete wind shield and shock mounting accessory designed for use with NTG1, NTG2, NTG3, NTG4, and NTG4+ shotgun microphones as well as any third-party shotgun microphone up to 325mm (12.75") in length. It features the Rycote® Lyre suspension system, providing the ultimate in mic suspension and isolation. Constructed from a single piece of hard-wearing thermoplastic, the Lyre provides superior acoustic suspension to traditional elastic solutions, and will never wear out, sag, or snap. The handle's recent redesign also helps reduce its weight significantly, while increasing the ergonomics for handheld use. Housed inside the grip is a heavy-duty Mogami cable which splits via a junction box into a highly-flexible thin cable inside the Blimp for minimized transference of vibration to the microphone. With the handle's lightweight design and suspension system, the newer Blimp design is over 25% lighter (550 g without microphone or DeadWombat fitted). It attaches to any standard boompole using the 3/8" thread socket at its base, and a Universal Blimp Mount is available as an option (sold separately) to remove the handle for even further reduced weight when the Blimp is being used primarily on a boompole.RØDE Blimp Includes:DeadWombat Artificial Wind ShieldDeadWombat CombHex Key ScrewdriverRØDE Blimp Features:Greatly reduces handling and wind noiseAccommodates most shotgun microphones 325mm in length and 19-22mm diameter.Rycote Lyre suspension system onboard with internal spacing guide.Lightweight skeleton handle with 3/8" thread mount.Mogami cable with Neutrik and Switchcraft XLR connectors.Dead Wombat wind shield included.RØDE Blimp Features:Specifications and further information available by clicking on the "RODE Blimp Datasheet" located under the "DOCUMENTATION" tab above. Rode BLIMP-II Wind Shield and Shock Mount System for Shotgun Microphones.
Price now:
From
$239.99
To
$309.00
Rode Blimp R
The RØDE Blimp is a complete wind shield and shock mounting accessory designed for use with NTG1, NTG2, NTG3, NTG4, and NTG4+ shotgun microphones as well as any third-party shotgun microphone up to 325mm (12.75") in length. It features the Rycote® Lyre suspension system, providing the ultimate in mic suspension and isolation. Constructed from a single piece of hard-wearing thermoplastic, the Lyre provides superior acoustic suspension to traditional elastic solutions, and will never wear out, sag, or snap. The handle's recent redesign also helps reduce its weight significantly, while increasing the ergonomics for handheld use. Housed inside the grip is a heavy-duty Mogami cable which splits via a junction box into a highly-flexible thin cable inside the Blimp for minimized transference of vibration to the microphone. With the handle's lightweight design and suspension system, the newer Blimp design is over 25% lighter (550 g without microphone or DeadWombat fitted). It attaches to any standard boompole using the 3/8" thread socket at its base, and a Universal Blimp Mount is available as an option (sold separately) to remove the handle for even further reduced weight when the Blimp is being used primarily on a boompole.RØDE Blimp Includes:DeadWombat Artificial Wind ShieldDeadWombat CombHex Key ScrewdriverRØDE Blimp Features:Greatly reduces handling and wind noiseAccommodates most shotgun microphones 325mm in length and 19-22mm diameter.Rycote Lyre suspension system onboard with internal spacing guide.Lightweight skeleton handle with 3/8" thread mount.Mogami cable with Neutrik and Switchcraft XLR connectors.Dead Wombat wind shield included.RØDE Blimp Features:Specifications and further information available by clicking on the "RODE Blimp Datasheet" located under the "DOCUMENTATION" tab above. Rode BLIMP-II Wind Shield and Shock Mount System for Shotgun Microphones.
Price now:
From
$239.99
To
$309.00
Reverb (US)
19.59% (+ $45.05)
Used
$275.00
Full Compass Systems
3.34% (+ $10.00)
New
$309.00
Reverb (US) | $239.99Free Delivery | Store |
Reverb (US) | $275.00Free Delivery | Store |
Reverb (US) | $284.28Free Delivery | Store |
Reverb (US) | $299.00Free Delivery | Store |
Reverb (US) | $299.00Free Delivery | Store |
Full Compass Systems | $309.00Free Delivery | Store |
Reverb (US) | $309.00Free Delivery | Store |
Product Description
The RØDE Blimp is a complete wind shield and shock mounting accessory designed for use with NTG1, NTG2, NTG3, NTG4, and NTG4+ shotgun microphones as well as any third-party shotgun microphone up to 325mm (12.75") in length. It features the Rycote® Lyre suspension system, providing the ultimate in mic suspension and isolation. Constructed from a single piece of hard-wearing thermoplastic, the Lyre provides superior acoustic suspension to traditional elastic solutions, and will never wear out, sag, or snap. The handle's recent redesign also helps reduce its weight significantly, while increasing the ergonomics for handheld use. Housed inside the grip is a heavy-duty Mogami cable which splits via a junction box into a highly-flexible thin cable inside the Blimp for minimized transference of vibration to the microphone. With the handle's lightweight design and suspension system, the newer Blimp design is over 25% lighter (550 g without microphone or DeadWombat fitted). It attaches to any standard boompole using the 3/8" thread socket at its base, and a Universal Blimp Mount is available as an option (sold separately) to remove the handle for even further reduced weight when the Blimp is being used primarily on a boompole.RØDE Blimp Includes:DeadWombat Artificial Wind ShieldDeadWombat CombHex Key ScrewdriverRØDE Blimp Features:Greatly reduces handling and wind noiseAccommodates most shotgun microphones 325mm in length and 19-22mm diameter.Rycote Lyre suspension system onboard with internal spacing guide.Lightweight skeleton handle with 3/8" thread mount.Mogami cable with Neutrik and Switchcraft XLR connectors.Dead Wombat wind shield included.RØDE Blimp Features:Specifications and further information available by clicking on the "RODE Blimp Datasheet" located under the "DOCUMENTATION" tab above. Rode BLIMP-II Wind Shield and Shock Mount System for Shotgun Microphones.
Product Specifications
General | |
|---|---|
Size | 24 |
Brand | Rode |
Color | gray |
Material | lead |
Delivery, Returns & Refunds
Delivery
Sellers offer a range of delivery options, so you can choose the one that’s most convenient for you. Many sellers offer free delivery. You can always find the postage cost and estimated delivery date in a seller’s listing. You'll then be able to see a full list of delivery options during checkout. These can include: Express delivery, Standard delivery, Economy delivery, Click & Collect, Free local collection from seller.
Returns
Your options for returning an item vary depending on what you want to return, why you want to return it, and the seller's return policy. If the item is damaged or doesn't match the listing description, you can return it even if the seller's returns policy says they don't accept returns. If you've changed your mind and no longer want an item, you can still request a return, but the seller doesn't have to accept it. If the buyer changes their mind about a purchase and wants to return an item, they may need to pay return postage costs, depending on the seller's return policy. Sellers can provide a return postage address and additional return postage information for the buyer. Sellers pay for return postage if there's a problem with the item. For example, if the item doesn't match the listing description, is damaged or defective or is counterfeit. By law, customers in the European Union also have the right to cancel the purchase of an item within 14 days beginning from the day you receive, or a third party indicated by you (other than the carrier) receives, the last good ordered by you (if delivered separately). This applies to all products except for digital items (e.g. Digital Music) that are provided immediately to you with your acknowledgment, and other items such as video, DVD, audio, video games, Sex and Sensuality products and software products where the item has been unsealed.
Refunds
Sellers have to offer a refund for certain items only if they are faulty, such as: Personalized items and custom-made items, Perishable items, Newspapers and magazines, Unwrapped CDs DVDs and computer software. If you used your PayPal balance or bank account to fund the original payment, the refunded money will go back to your PayPal account balance. If you used a credit or debit card to fund the original payment, the refunded money will go back to your card. The seller will effect the refund within three working days but it may take up to 30 days for Paypal to process the transfer. For payments funded partially by a card and partially by your balance/bank, the money taken from your card will go back to your card and the remainder will return to your PayPal balance.