Out Of Stock
Rogue Light/White Expoimaging Flashbender V3 Reflector For On/Off-Camera Flash Large
We currently have no offers for this product
Product Description
The FlashBender v3 Large Reflector is better than a simple flash diffuser.When to Use a FlashBender Large ReflectorWhen attached to your on-camera flash the FlashBender v3 Large Reflector will soften the light from your flash whether you're shooting inside under a white ceiling, or outside in the open.The FlashBender v3 Large Reflector can also be used to modify the light from your off-camera flashes in multi-light set ups. Attach the Large Reflector to your flash and manipulate its shape to direct the light on your main, background, accent, or hair light.FlashBenders Pack Flat and Don't Take Up Usable Space for Other GearFlashBenders are the ultimate "there when you need it" light modifier because they are light weight and simply fold in half to pack flat in your bag without taking up any significant space. Because FlashBenders can sit on top of other gear or in a laptop slot, you can carry it with you whenever you might need it, saving valuable bag space. Photographers looking to pack and travel light will be hard pressed to find anything as useful or adaptable as the FlashBender v3 light modifiers.FlashBenders Direct Light Where You Need ItThe FlashBender's shapeable reflector directs light up and forward towards your subject. This allows you to take advantage of a good bounce surface when you have it (white ceiling), or to avoid it by curving the top of the reflector forward when you do not (yellow or orange colored ceiling, or no ceiling).FlashBenders Are More Efficient Than DiffusersThe FlashBender design also conserves energy because it directs the light from your flash towards your subject instead of scattering it everywhere. This has the benefit of allowing you to shoot on lower flash power settings with faster recycle times, and results in fewer overheating problems and longer battery life.Simple flash diffusers on the other hand just do one thing, scatter light everywhere. This can work when you're shooting under an 8' white ceiling, but not so much when you're shooting outside, or under an off-colored ceiling (yellow, orange, etc).Unfortunately, because diffusers waste power by scattering light everywhere your flash is constantly firing at higher power settings than necessary to light your subject. This means your flash gets hotter, takes longer to recycle, and your batteries drain faster than if you used a more effective and efficient directional flash modifier.On-Camera Flash PhotographyAttach the FlashBender reflector to your flash (locked in upright position) and shape the top of the reflector to bounce light forward to fill shadows and create catch lights. If you are shooting under a good bounce surface (white ceiling), then shape the reflector to allow some light to bounce off the ceiling.Off-Camera Flash PhotographyBecause the FlashBender v3 is shapeable you can also use it off-camera to modify your main, background, or hair light when shooting with multiple speedlights. You can use a single FlashBender to modify light in different ways for different purposes. The FlashBender reflector provides directional control over light from off-camera flashes. Attach the FlashBender reflector to your flash and shape its top and sides to direct light to where you want it, or to block it from where you do not.Reflector/Gobo: Shape the FlashBender to control lens flare, light your subject without spilling light onto your background, or light your background without spilling light onto your subject.Snoot: Shape the FlashBender into a snoot (tube) to create a circle of light. The snoot can be used to selectively light a face, or to focus a hair or accent light.FlashBender v3 is Designed to Fit a Wide Variety of Strobe Shapes and SizesThe attachment strap incorporated into every FlashBender v3 modifier can be adjusted to fit flashes as small as 6.75" in circumference and strobes as large as 17". This versatility means that FlashBender v3 modifiers will fit small flashes like the Nissin i400 or Godox TT350S, often used with today's smaller mirrorless camera bodies, as well as full size flashes such as the professional Nissin MG80 Pro and the Godox AD200. And, of course, the FlashBender v3 fits flagship flashes from Canon, Nikon and Sony like the Canon 600EX II-RT, the Nikon SB-700 AF and the Sony HVL-F60RM.The FlashBender v3's adaptable design will also fit flashes of different shapes, including the round-head Profoto A1X, Godox V1 and some even larger, power-pack based strobes. Additionally, because the mount is incorporated in to the FlashBender v3, there are no bulky, expensive mounts to purchase separately, or that need to remain attached to flashes when not in use.FlashBender v3 Design Attaches to These Flashes and More:• Canon: 430EX, 470EX, 580EX, 600EX• Godox: TT350, TT685, V860, AD200, V1• Nikon: SB500, SB600, SB700, SB800, SB900, SB5000• Nissin: i40, i400, i600, i60A, Di700A, MG80, MG10• Olympus: FL-600R, FL-700WR, FL-900R• Profoto: A1, A1X• Sony: HVL-F32M, HVL-F45RM, HVL-F60RMWhat's new in the v3 FlashBender?We upgraded the attachment strap to include a grippier material that helps the FlashBender to stay put when attached to your flash. We upgraded the FlashBender's 'shapeability' by incorporating a new mesh material into the fabric. The new quick release buckle is faster to use, and the new attachment strap design can be adjusted to fit a wider range of flashes with circumference measurements of 6.75" to 17" (see above). Finally, we modified the hook and loop on the FlashBender v3 to make it easier to stow away in your bag.Note: The hook and loop modifications on the FlashBender v3 reflectors and Diffusion Panels v3 make the new designs incompatible with previous versions of the Rogue Diffusion Panels. To convert the FlashBender v3 Large Reflector to a Large Soft Box you will need to use the Rogue Diffusion Panel v3, which is included in the FlashBender v3 Large Soft Box Kit.
Rogue Light/White Expoimaging Flashbender V3 Reflector For On/Off-Camera Flash Large
The FlashBender v3 Large Reflector is better than a simple flash diffuser.When to Use a FlashBender Large ReflectorWhen attached to your on-camera flash the FlashBender v3 Large Reflector will soften the light from your flash whether you're shooting inside under a white ceiling, or outside in the open.The FlashBender v3 Large Reflector can also be used to modify the light from your off-camera flashes in multi-light set ups. Attach the Large Reflector to your flash and manipulate its shape to direct the light on your main, background, accent, or hair light.FlashBenders Pack Flat and Don't Take Up Usable Space for Other GearFlashBenders are the ultimate "there when you need it" light modifier because they are light weight and simply fold in half to pack flat in your bag without taking up any significant space. Because FlashBenders can sit on top of other gear or in a laptop slot, you can carry it with you whenever you might need it, saving valuable bag space. Photographers looking to pack and travel light will be hard pressed to find anything as useful or adaptable as the FlashBender v3 light modifiers.FlashBenders Direct Light Where You Need ItThe FlashBender's shapeable reflector directs light up and forward towards your subject. This allows you to take advantage of a good bounce surface when you have it (white ceiling), or to avoid it by curving the top of the reflector forward when you do not (yellow or orange colored ceiling, or no ceiling).FlashBenders Are More Efficient Than DiffusersThe FlashBender design also conserves energy because it directs the light from your flash towards your subject instead of scattering it everywhere. This has the benefit of allowing you to shoot on lower flash power settings with faster recycle times, and results in fewer overheating problems and longer battery life.Simple flash diffusers on the other hand just do one thing, scatter light everywhere. This can work when you're shooting under an 8' white ceiling, but not so much when you're shooting outside, or under an off-colored ceiling (yellow, orange, etc).Unfortunately, because diffusers waste power by scattering light everywhere your flash is constantly firing at higher power settings than necessary to light your subject. This means your flash gets hotter, takes longer to recycle, and your batteries drain faster than if you used a more effective and efficient directional flash modifier.On-Camera Flash PhotographyAttach the FlashBender reflector to your flash (locked in upright position) and shape the top of the reflector to bounce light forward to fill shadows and create catch lights. If you are shooting under a good bounce surface (white ceiling), then shape the reflector to allow some light to bounce off the ceiling.Off-Camera Flash PhotographyBecause the FlashBender v3 is shapeable you can also use it off-camera to modify your main, background, or hair light when shooting with multiple speedlights. You can use a single FlashBender to modify light in different ways for different purposes. The FlashBender reflector provides directional control over light from off-camera flashes. Attach the FlashBender reflector to your flash and shape its top and sides to direct light to where you want it, or to block it from where you do not.Reflector/Gobo: Shape the FlashBender to control lens flare, light your subject without spilling light onto your background, or light your background without spilling light onto your subject.Snoot: Shape the FlashBender into a snoot (tube) to create a circle of light. The snoot can be used to selectively light a face, or to focus a hair or accent light.FlashBender v3 is Designed to Fit a Wide Variety of Strobe Shapes and SizesThe attachment strap incorporated into every FlashBender v3 modifier can be adjusted to fit flashes as small as 6.75" in circumference and strobes as large as 17". This versatility means that FlashBender v3 modifiers will fit small flashes like the Nissin i400 or Godox TT350S, often used with today's smaller mirrorless camera bodies, as well as full size flashes such as the professional Nissin MG80 Pro and the Godox AD200. And, of course, the FlashBender v3 fits flagship flashes from Canon, Nikon and Sony like the Canon 600EX II-RT, the Nikon SB-700 AF and the Sony HVL-F60RM.The FlashBender v3's adaptable design will also fit flashes of different shapes, including the round-head Profoto A1X, Godox V1 and some even larger, power-pack based strobes. Additionally, because the mount is incorporated in to the FlashBender v3, there are no bulky, expensive mounts to purchase separately, or that need to remain attached to flashes when not in use.FlashBender v3 Design Attaches to These Flashes and More:• Canon: 430EX, 470EX, 580EX, 600EX• Godox: TT350, TT685, V860, AD200, V1• Nikon: SB500, SB600, SB700, SB800, SB900, SB5000• Nissin: i40, i400, i600, i60A, Di700A, MG80, MG10• Olympus: FL-600R, FL-700WR, FL-900R• Profoto: A1, A1X• Sony: HVL-F32M, HVL-F45RM, HVL-F60RMWhat's new in the v3 FlashBender?We upgraded the attachment strap to include a grippier material that helps the FlashBender to stay put when attached to your flash. We upgraded the FlashBender's 'shapeability' by incorporating a new mesh material into the fabric. The new quick release buckle is faster to use, and the new attachment strap design can be adjusted to fit a wider range of flashes with circumference measurements of 6.75" to 17" (see above). Finally, we modified the hook and loop on the FlashBender v3 to make it easier to stow away in your bag.Note: The hook and loop modifications on the FlashBender v3 reflectors and Diffusion Panels v3 make the new designs incompatible with previous versions of the Rogue Diffusion Panels. To convert the FlashBender v3 Large Reflector to a Large Soft Box you will need to use the Rogue Diffusion Panel v3, which is included in the FlashBender v3 Large Soft Box Kit.
Delivery, Returns & Refunds
Delivery
Sellers offer a range of delivery options, so you can choose the one that’s most convenient for you. Many sellers offer free delivery. You can always find the postage cost and estimated delivery date in a seller’s listing. You'll then be able to see a full list of delivery options during checkout. These can include: Express delivery, Standard delivery, Economy delivery, Click & Collect, Free local collection from seller.
Returns
Your options for returning an item vary depending on what you want to return, why you want to return it, and the seller's return policy. If the item is damaged or doesn't match the listing description, you can return it even if the seller's returns policy says they don't accept returns. If you've changed your mind and no longer want an item, you can still request a return, but the seller doesn't have to accept it. If the buyer changes their mind about a purchase and wants to return an item, they may need to pay return postage costs, depending on the seller's return policy. Sellers can provide a return postage address and additional return postage information for the buyer. Sellers pay for return postage if there's a problem with the item. For example, if the item doesn't match the listing description, is damaged or defective or is counterfeit. By law, customers in the European Union also have the right to cancel the purchase of an item within 14 days beginning from the day you receive, or a third party indicated by you (other than the carrier) receives, the last good ordered by you (if delivered separately). This applies to all products except for digital items (e.g. Digital Music) that are provided immediately to you with your acknowledgment, and other items such as video, DVD, audio, video games, Sex and Sensuality products and software products where the item has been unsealed.
Refunds
Sellers have to offer a refund for certain items only if they are faulty, such as: Personalized items and custom-made items, Perishable items, Newspapers and magazines, Unwrapped CDs DVDs and computer software. If you used your PayPal balance or bank account to fund the original payment, the refunded money will go back to your PayPal account balance. If you used a credit or debit card to fund the original payment, the refunded money will go back to your card. The seller will effect the refund within three working days but it may take up to 30 days for Paypal to process the transfer. For payments funded partially by a card and partially by your balance/bank, the money taken from your card will go back to your card and the remainder will return to your PayPal balance.