Rupert Neve Designs Rndi-S
The RNDI-S’ signature sound is the product of custom Rupert Neve Designs transformers and class-A biased, discrete FET amplifiers. The carefully orchestrated union of these two elements is key to the unique response of the RNDI-S, delivering a powerful and vibrant direct sound capable of reproducing the full harmonic depth of basses, guitars, keyboards, acoustic instruments, professional line-level sources and consumer devices with a 3.5mm jack. With portable, powerful, larger-than-life tone, the RNDI-S is ready to make your stereo or mono direct sources shine.FeaturesCustom Rupert Neve Designs transformers for rich, powerful toneExceptional performance with any instrumentUnrivaled clarity from discrete FET amplifiersDrives long lines with minimal lossRugged steel frame built for life on the roadPowered by dual 48V phantom powerExcellent phase coherence at all frequenciesSpecificationsCONTROLS & I/O2x ¼” INPUTSHi-Z unbalanced inputs with 2.2M Ohms input impedance.2x ¼” THRU JACKSParallel ¼” jacks used to send signal to an amp or speaker.3.5MM INPUTStereo unbalanced input with 95 kOhm input impedance. Ch 1 = Tip, Ch 2 = Ring.INPUT SELECTSelects ¼” Input or 3.5mm Input.48V POWER LEDSIndicates that +48V phantom power is present for each channel from the connected mic preamp(s). Power must be supplied independently to both channels.GROUND LIFTSIsolates the XLR Pin 1 from the instrument input ground.OUTPUTTransformer-balanced XLR output. ImpedanceNOISEMeasured Output, un-weighted, 22 Hz - 22 kHz, source impedance 150 Ohm.Better than -110 dBVINPUT IMPEDANCEInstrument Setting: 2.2 Meg Ohm3.5 mm Input: 95 KilohmOUTPUT IMPEDANCELess than 40 OhmsFREQUENCY RESPONSE+/- 0.25 dB from 30 Hz - 63 kHz+/- 1 dB from 12.5 Hz - 120 kHz-3 dBu @ 5 kHzMAXIMUM INPUT LEVELInstrument = +20.5 dBuMAXIMUM OUTPUT LEVEL+11.5 dBu output at maximum input levelTOTAL HARMONIC DISTORTION AND NOISE@ 1 kHz, -20 dBu Input Level, no load : 0.009% Typical (2nd and 3rd Harmonic)@ 1 kHz, +20 dBu Input Level, no load : 0.35% Typical (2nd and 3rd Harmonic)@ 20 Hz, -20 dBu Input Level, no load : 0.9% Typical (2nd and 3rd Harmonic)CROSSTALK @ 10 kHzInstrument Input: -115 dB3.5 mm Input: -108 dBPOWER REQUIREMENTSPhantom power, 4.5mA @ +48VDCWEIGHT1.5lbsDIMENSIONS7” long x 5”wide x 1.75” highMOUNTING OPTION19” Rack Shelf, 4 hole pattern (bottom of unit) for 6-32 machine screws Rupert Neve Designs RNDI-S Stereo Active Transformer Direct Box.
Price now:
From
$539.99
To
$599.00
Price History:
Details:Rupert Neve Designs Rndi-S
The RNDI-S’ signature sound is the product of custom Rupert Neve Designs transformers and class-A biased, discrete FET amplifiers. The carefully orchestrated union of these two elements is key to the unique response of the RNDI-S, delivering a powerful and vibrant direct sound capable of reproducing the full harmonic depth of basses, guitars, keyboards, acoustic instruments, professional line-level sources and consumer devices with a 3.5mm jack. With portable, powerful, larger-than-life tone, the RNDI-S is ready to make your stereo or mono direct sources shine.FeaturesCustom Rupert Neve Designs transformers for rich, powerful toneExceptional performance with any instrumentUnrivaled clarity from discrete FET amplifiersDrives long lines with minimal lossRugged steel frame built for life on the roadPowered by dual 48V phantom powerExcellent phase coherence at all frequenciesSpecificationsCONTROLS & I/O2x ¼” INPUTSHi-Z unbalanced inputs with 2.2M Ohms input impedance.2x ¼” THRU JACKSParallel ¼” jacks used to send signal to an amp or speaker.3.5MM INPUTStereo unbalanced input with 95 kOhm input impedance. Ch 1 = Tip, Ch 2 = Ring.INPUT SELECTSelects ¼” Input or 3.5mm Input.48V POWER LEDSIndicates that +48V phantom power is present for each channel from the connected mic preamp(s). Power must be supplied independently to both channels.GROUND LIFTSIsolates the XLR Pin 1 from the instrument input ground.OUTPUTTransformer-balanced XLR output. ImpedanceNOISEMeasured Output, un-weighted, 22 Hz - 22 kHz, source impedance 150 Ohm.Better than -110 dBVINPUT IMPEDANCEInstrument Setting: 2.2 Meg Ohm3.5 mm Input: 95 KilohmOUTPUT IMPEDANCELess than 40 OhmsFREQUENCY RESPONSE+/- 0.25 dB from 30 Hz - 63 kHz+/- 1 dB from 12.5 Hz - 120 kHz-3 dBu @ 5 kHzMAXIMUM INPUT LEVELInstrument = +20.5 dBuMAXIMUM OUTPUT LEVEL+11.5 dBu output at maximum input levelTOTAL HARMONIC DISTORTION AND NOISE@ 1 kHz, -20 dBu Input Level, no load : 0.009% Typical (2nd and 3rd Harmonic)@ 1 kHz, +20 dBu Input Level, no load : 0.35% Typical (2nd and 3rd Harmonic)@ 20 Hz, -20 dBu Input Level, no load : 0.9% Typical (2nd and 3rd Harmonic)CROSSTALK @ 10 kHzInstrument Input: -115 dB3.5 mm Input: -108 dBPOWER REQUIREMENTSPhantom power, 4.5mA @ +48VDCWEIGHT1.5lbsDIMENSIONS7” long x 5”wide x 1.75” highMOUNTING OPTION19” Rack Shelf, 4 hole pattern (bottom of unit) for 6-32 machine screws Rupert Neve Designs RNDI-S Stereo Active Transformer Direct Box.
Price now:
From
$539.99
To
$599.00
This site contains affiliate links for which we may be compensated.
Reverb (US)
0.00% (~ $$v)
Used
$539.99
Reverb (US)
0.00% (~ $$v)
New
$599.00
Full Compass Systems
20.04% (+ $100.00)
New
$599.00
Reverb (US) | $539.99Free Delivery | Store |
Reverb (US) | $599.00Free Delivery | Store |
Reverb (US) | $599.00Free Delivery | Store |
Reverb (US) | $599.00Free Delivery | Store |
Full Compass Systems | $599.00Free Delivery | Store |
Reverb (US) | $599.00Free Delivery | Store |
Reverb (US) | $599.00Free Delivery | Store |
Product Description
The RNDI-S’ signature sound is the product of custom Rupert Neve Designs transformers and class-A biased, discrete FET amplifiers. The carefully orchestrated union of these two elements is key to the unique response of the RNDI-S, delivering a powerful and vibrant direct sound capable of reproducing the full harmonic depth of basses, guitars, keyboards, acoustic instruments, professional line-level sources and consumer devices with a 3.5mm jack. With portable, powerful, larger-than-life tone, the RNDI-S is ready to make your stereo or mono direct sources shine.FeaturesCustom Rupert Neve Designs transformers for rich, powerful toneExceptional performance with any instrumentUnrivaled clarity from discrete FET amplifiersDrives long lines with minimal lossRugged steel frame built for life on the roadPowered by dual 48V phantom powerExcellent phase coherence at all frequenciesSpecificationsCONTROLS & I/O2x ¼” INPUTSHi-Z unbalanced inputs with 2.2M Ohms input impedance.2x ¼” THRU JACKSParallel ¼” jacks used to send signal to an amp or speaker.3.5MM INPUTStereo unbalanced input with 95 kOhm input impedance. Ch 1 = Tip, Ch 2 = Ring.INPUT SELECTSelects ¼” Input or 3.5mm Input.48V POWER LEDSIndicates that +48V phantom power is present for each channel from the connected mic preamp(s). Power must be supplied independently to both channels.GROUND LIFTSIsolates the XLR Pin 1 from the instrument input ground.OUTPUTTransformer-balanced XLR output. ImpedanceNOISEMeasured Output, un-weighted, 22 Hz - 22 kHz, source impedance 150 Ohm.Better than -110 dBVINPUT IMPEDANCEInstrument Setting: 2.2 Meg Ohm3.5 mm Input: 95 KilohmOUTPUT IMPEDANCELess than 40 OhmsFREQUENCY RESPONSE+/- 0.25 dB from 30 Hz - 63 kHz+/- 1 dB from 12.5 Hz - 120 kHz-3 dBu @ 5 kHzMAXIMUM INPUT LEVELInstrument = +20.5 dBuMAXIMUM OUTPUT LEVEL+11.5 dBu output at maximum input levelTOTAL HARMONIC DISTORTION AND NOISE@ 1 kHz, -20 dBu Input Level, no load : 0.009% Typical (2nd and 3rd Harmonic)@ 1 kHz, +20 dBu Input Level, no load : 0.35% Typical (2nd and 3rd Harmonic)@ 20 Hz, -20 dBu Input Level, no load : 0.9% Typical (2nd and 3rd Harmonic)CROSSTALK @ 10 kHzInstrument Input: -115 dB3.5 mm Input: -108 dBPOWER REQUIREMENTSPhantom power, 4.5mA @ +48VDCWEIGHT1.5lbsDIMENSIONS7” long x 5”wide x 1.75” highMOUNTING OPTION19” Rack Shelf, 4 hole pattern (bottom of unit) for 6-32 machine screws Rupert Neve Designs RNDI-S Stereo Active Transformer Direct Box.
Product Specifications
General | |
|---|---|
Brand | Rupert Neve Designs |
Color | trans |
Size | small |
Material | steel |
Delivery, Returns & Refunds
Delivery
Sellers offer a range of delivery options, so you can choose the one that’s most convenient for you. Many sellers offer free delivery. You can always find the postage cost and estimated delivery date in a seller’s listing. You'll then be able to see a full list of delivery options during checkout. These can include: Express delivery, Standard delivery, Economy delivery, Click & Collect, Free local collection from seller.
Returns
Your options for returning an item vary depending on what you want to return, why you want to return it, and the seller's return policy. If the item is damaged or doesn't match the listing description, you can return it even if the seller's returns policy says they don't accept returns. If you've changed your mind and no longer want an item, you can still request a return, but the seller doesn't have to accept it. If the buyer changes their mind about a purchase and wants to return an item, they may need to pay return postage costs, depending on the seller's return policy. Sellers can provide a return postage address and additional return postage information for the buyer. Sellers pay for return postage if there's a problem with the item. For example, if the item doesn't match the listing description, is damaged or defective or is counterfeit. By law, customers in the European Union also have the right to cancel the purchase of an item within 14 days beginning from the day you receive, or a third party indicated by you (other than the carrier) receives, the last good ordered by you (if delivered separately). This applies to all products except for digital items (e.g. Digital Music) that are provided immediately to you with your acknowledgment, and other items such as video, DVD, audio, video games, Sex and Sensuality products and software products where the item has been unsealed.
Refunds
Sellers have to offer a refund for certain items only if they are faulty, such as: Personalized items and custom-made items, Perishable items, Newspapers and magazines, Unwrapped CDs DVDs and computer software. If you used your PayPal balance or bank account to fund the original payment, the refunded money will go back to your PayPal account balance. If you used a credit or debit card to fund the original payment, the refunded money will go back to your card. The seller will effect the refund within three working days but it may take up to 30 days for Paypal to process the transfer. For payments funded partially by a card and partially by your balance/bank, the money taken from your card will go back to your card and the remainder will return to your PayPal balance.