Myron L Green/Red 721Ii 720 Series Ii Analog Ph Monitor Only
The advanced ""isolated"" circuitry of the 720 Series II pH Monitor/controllers guarantees accurate and reliable measurements - completely eliminating ground-loop and noise issues. The unique sensor preamp allows for longer distances between the sensor and the Monitor/controller without the loss of accuracy or reliability.All Myron L Monitor/controllers feature a highly refined and precise Temperature Compensation circuit. This feature perfectly matches the NERNST equation correcting the displayed reading to 25°C. The TC may be disabled to conform with USP requirements.Built-in electronic calibration allows for fast quality checks without buffers. (Note: for maximum system accuracy buffers are recommended).A push-to-test button makes set point checks easy, while the internal alarm set discourages unauthorized adjustments.Standard on all controller models is a heavy-duty 10 amp output relay, operating on either increasing or decreasing readings. Bright green/red LEDs indicate above/below set point readings.All 720 Series II models feature an IP65/ NEMA 4X water-resistant and corrosion proof rated enclosure. Compact in size, at 152 x 122 mm/6 x 4.8 in., the 720 Series II models are suitable for panel, bench or surface mounting.FeaturespH 0-14Choice of 3-1/2 digit display or analog meterAdvanced ""Isolated"" circuitryAutomatic temperature compensation to 25°C (NERNST equation)Isolated 0-10 VDC Recorder Output standardIP65/NEMA 4X water-resistant and corrosion-proof enclosureBuilt-in electronic calibrationSingle set point/alarm standardAdjustable set point hysteresisSolid State 24 VDC Output10 amp relay operates on choice of increasing or decreasing readingPush-to-test set point checkInternal set point discourages unauthorized adjustmentSelectable 115/230 VACUnique, easily installed sensorsHeavy duty ""F"" model sensors may be installed in ANY direction including invertedBenefitsAffordableEase of OperationLow MaintenanceEnsures Product Quality720 Series II Product Applications:Process ControlReverse OsmosisSeawater DesalinationWaste TreatmentFood ProcessingPlatingPower PlantsLaboratoriesPrintingPaper & PulpBoilers & Cooling TowersPotable WaterWaste Water TreatmentSwimming Pools & SpasBleach ManufacturingReduction of Chromate WasteEnvironmentalFor more information, please see Data Sheet
Price now:
From
$48.20
To
$655.70
Price History:
Details:Myron L Green/Red 721Ii 720 Series Ii Analog Ph Monitor Only
The advanced ""isolated"" circuitry of the 720 Series II pH Monitor/controllers guarantees accurate and reliable measurements - completely eliminating ground-loop and noise issues. The unique sensor preamp allows for longer distances between the sensor and the Monitor/controller without the loss of accuracy or reliability.All Myron L Monitor/controllers feature a highly refined and precise Temperature Compensation circuit. This feature perfectly matches the NERNST equation correcting the displayed reading to 25°C. The TC may be disabled to conform with USP requirements.Built-in electronic calibration allows for fast quality checks without buffers. (Note: for maximum system accuracy buffers are recommended).A push-to-test button makes set point checks easy, while the internal alarm set discourages unauthorized adjustments.Standard on all controller models is a heavy-duty 10 amp output relay, operating on either increasing or decreasing readings. Bright green/red LEDs indicate above/below set point readings.All 720 Series II models feature an IP65/ NEMA 4X water-resistant and corrosion proof rated enclosure. Compact in size, at 152 x 122 mm/6 x 4.8 in., the 720 Series II models are suitable for panel, bench or surface mounting.FeaturespH 0-14Choice of 3-1/2 digit display or analog meterAdvanced ""Isolated"" circuitryAutomatic temperature compensation to 25°C (NERNST equation)Isolated 0-10 VDC Recorder Output standardIP65/NEMA 4X water-resistant and corrosion-proof enclosureBuilt-in electronic calibrationSingle set point/alarm standardAdjustable set point hysteresisSolid State 24 VDC Output10 amp relay operates on choice of increasing or decreasing readingPush-to-test set point checkInternal set point discourages unauthorized adjustmentSelectable 115/230 VACUnique, easily installed sensorsHeavy duty ""F"" model sensors may be installed in ANY direction including invertedBenefitsAffordableEase of OperationLow MaintenanceEnsures Product Quality720 Series II Product Applications:Process ControlReverse OsmosisSeawater DesalinationWaste TreatmentFood ProcessingPlatingPower PlantsLaboratoriesPrintingPaper & PulpBoilers & Cooling TowersPotable WaterWaste Water TreatmentSwimming Pools & SpasBleach ManufacturingReduction of Chromate WasteEnvironmentalFor more information, please see Data Sheet
Price now:
From
$48.20
To
$655.70
This site contains affiliate links for which we may be compensated.
IsoPure Water
0.00% (~ $$v)
New
$48.20
Selectum LLC
0.00% (~ $$v)
New
$655.70
IsoPure Water | $48.20Free Delivery | Store |
Selectum LLC | $655.70Free Delivery | Store |
Product Description
The advanced ""isolated"" circuitry of the 720 Series II pH Monitor/controllers guarantees accurate and reliable measurements - completely eliminating ground-loop and noise issues. The unique sensor preamp allows for longer distances between the sensor and the Monitor/controller without the loss of accuracy or reliability.All Myron L Monitor/controllers feature a highly refined and precise Temperature Compensation circuit. This feature perfectly matches the NERNST equation correcting the displayed reading to 25°C. The TC may be disabled to conform with USP requirements.Built-in electronic calibration allows for fast quality checks without buffers. (Note: for maximum system accuracy buffers are recommended).A push-to-test button makes set point checks easy, while the internal alarm set discourages unauthorized adjustments.Standard on all controller models is a heavy-duty 10 amp output relay, operating on either increasing or decreasing readings. Bright green/red LEDs indicate above/below set point readings.All 720 Series II models feature an IP65/ NEMA 4X water-resistant and corrosion proof rated enclosure. Compact in size, at 152 x 122 mm/6 x 4.8 in., the 720 Series II models are suitable for panel, bench or surface mounting.FeaturespH 0-14Choice of 3-1/2 digit display or analog meterAdvanced ""Isolated"" circuitryAutomatic temperature compensation to 25°C (NERNST equation)Isolated 0-10 VDC Recorder Output standardIP65/NEMA 4X water-resistant and corrosion-proof enclosureBuilt-in electronic calibrationSingle set point/alarm standardAdjustable set point hysteresisSolid State 24 VDC Output10 amp relay operates on choice of increasing or decreasing readingPush-to-test set point checkInternal set point discourages unauthorized adjustmentSelectable 115/230 VACUnique, easily installed sensorsHeavy duty ""F"" model sensors may be installed in ANY direction including invertedBenefitsAffordableEase of OperationLow MaintenanceEnsures Product Quality720 Series II Product Applications:Process ControlReverse OsmosisSeawater DesalinationWaste TreatmentFood ProcessingPlatingPower PlantsLaboratoriesPrintingPaper & PulpBoilers & Cooling TowersPotable WaterWaste Water TreatmentSwimming Pools & SpasBleach ManufacturingReduction of Chromate WasteEnvironmentalFor more information, please see Data Sheet
Product Specifications
General | |
|---|---|
Size | 20 |
Brand | WD-35653-00 |
Color | green/red |
Delivery, Returns & Refunds
Delivery
Sellers offer a range of delivery options, so you can choose the one that’s most convenient for you. Many sellers offer free delivery. You can always find the postage cost and estimated delivery date in a seller’s listing. You'll then be able to see a full list of delivery options during checkout. These can include: Express delivery, Standard delivery, Economy delivery, Click & Collect, Free local collection from seller.
Returns
Your options for returning an item vary depending on what you want to return, why you want to return it, and the seller's return policy. If the item is damaged or doesn't match the listing description, you can return it even if the seller's returns policy says they don't accept returns. If you've changed your mind and no longer want an item, you can still request a return, but the seller doesn't have to accept it. If the buyer changes their mind about a purchase and wants to return an item, they may need to pay return postage costs, depending on the seller's return policy. Sellers can provide a return postage address and additional return postage information for the buyer. Sellers pay for return postage if there's a problem with the item. For example, if the item doesn't match the listing description, is damaged or defective or is counterfeit. By law, customers in the European Union also have the right to cancel the purchase of an item within 14 days beginning from the day you receive, or a third party indicated by you (other than the carrier) receives, the last good ordered by you (if delivered separately). This applies to all products except for digital items (e.g. Digital Music) that are provided immediately to you with your acknowledgment, and other items such as video, DVD, audio, video games, Sex and Sensuality products and software products where the item has been unsealed.
Refunds
Sellers have to offer a refund for certain items only if they are faulty, such as: Personalized items and custom-made items, Perishable items, Newspapers and magazines, Unwrapped CDs DVDs and computer software. If you used your PayPal balance or bank account to fund the original payment, the refunded money will go back to your PayPal account balance. If you used a credit or debit card to fund the original payment, the refunded money will go back to your card. The seller will effect the refund within three working days but it may take up to 30 days for Paypal to process the transfer. For payments funded partially by a card and partially by your balance/bank, the money taken from your card will go back to your card and the remainder will return to your PayPal balance.