Pce-Pva 100-Spm 1-Kit Light Pce Instruments Photovoltaic Meter Kit: Photovoltaic Meter With Solar Measuring Device
PCE-PVA 100The photovoltaic meter is a useful tool to examine solar cells for their characteristics. With a DC voltage range of 0… 60V and a DC current range of 0… 12 A, the photovoltaic meter covers a large number of solar modules. The determined characteristic curves are saved directly on the solar module tester. Up to 100 measurements can be stored in the data memory of the photovoltaic meter. The stored measured values can then be read out and further processed on a PC with the associated software. In addition, it is possible to operate the photovoltaic meter completely via the software.The photovoltaic meter has two different measuring functions for determining the characteristics of a solar module. In the automatic mode, the characteristic curve is created with automatic parameters by the photovoltaic meter. This gives the operator a first impression of the state of the solar module. In manual mode, the start and end of the current value can be set on the photovoltaic meter. If the area of the solar module and the power of the incoming radiation are stored in W/m², the photovoltaic meter can calculate the efficiency and the fill factor of the cell. Another measuring function with the solar module tester is the one-point measurement. A specific current can be controlled and checked by the photovoltaic meter.The LCD display of the photovoltaic meter has a size of 4.8"". This means that the characteristic curve and all measured values can be read off at the same time. In order to analyze the characteristic curve better, each individual measuring point on the photovoltaic meter can be approached. For a different view of the X and Y axes, you can switch between current, voltage and power by pressing a button on the photovoltaic meter.Because of its many different functions, the radiation detector is the ideal measuring device to examine solar modules for their effectiveness. The radiation detector is therefore used in photovoltaic systems and research facilities for the further development of solar modules.PCE-SPM 1The solar meter for solar energy is the ideal handheld test device for solar engineers, architects and hobby solar technicians. With this solar measuring device you can determine the solar power. This enables a statement to be made about the composition and design of a photovoltaic system. The light intensity is measured using a monocrystalline silicon solar cell. The processor integrated in the solar measuring device ensures automatic correction to maintain the basic accuracy after each device has been calibrated in the solar simulator. The most important parameter P tot (in W/m²) can be read directly on the display.The data contained in the internal memory (32,000 measured values) can be transferred to the serial interface of a PC using the software. This solar meter was also designed for outdoor use and has a weatherproof plastic housing. Its compact dimensions allow comfortable one-hand operation.1. Solar direct measurement on siteThe solar measuring device can be used to measure the energy directly at a defined position. These measured values can include can be used to check the efficiency of PV modules or solar thermal systems.2. Simulation of temperature, power, voltage and current of PV modulesAttention: only possible in combination with the multimeter we offer.3. Long term measurementsThe solar measuring device is equipped with an internal data logger for measurements over longer periods of time.Solar radiationThe solar measuring device detects the full solar radiation, i.e. both the direct radiation and the diffuse solar radiation of the atmosphere. Most of the energy in solar radiation that is reflected on the surface of the earth is in the infrared visible strip of the spectrum, as ultraviolet radiation is absorbed by the atmosphere. The solar radiation varies over the year because the angle of the incident light rays is larger in summer than in winter and the rays are more perpendicular in summer.Features:Photovoltaic meter PCE-PVA 100Data memory for 100 measurementsMeasuring range 0 ... 12 A DCThree different test functionsPC interface for data transferSwitchable graphic viewSolar measuring device PCE-SPM 1Enables on-site measurement of the solar power yield / irradiation P totEnables long-term measurement via the internal measured value memory (32,000)Transmission and evaluation software included in the scope of delivery (in English)Enables comparative solar measurementMin, max and data hold functionPower supply by 4 Li-ion batteries (service life approx. 16 days with continuous use)Includes:1 x Photovoltaic meter PCE-PVA 1001 x Solar measuring device PCE-SPM 11 x Optical USB cable1 x Battery1 x Software CD2 x Kelvin clamps2 x Safety measuring lines (100 mm)1 x Mains power adapter1 x Internal sensor1 x Internal measured value memory1 x RS-232 PC cable1 x Software4 x Battery1 x Device bag1 x Instruction manual
Price now:
From
$1,862.90
To
$1,881.10
Price History:
Details:Pce-Pva 100-Spm 1-Kit Light Pce Instruments Photovoltaic Meter Kit: Photovoltaic Meter With Solar Measuring Device
PCE-PVA 100The photovoltaic meter is a useful tool to examine solar cells for their characteristics. With a DC voltage range of 0… 60V and a DC current range of 0… 12 A, the photovoltaic meter covers a large number of solar modules. The determined characteristic curves are saved directly on the solar module tester. Up to 100 measurements can be stored in the data memory of the photovoltaic meter. The stored measured values can then be read out and further processed on a PC with the associated software. In addition, it is possible to operate the photovoltaic meter completely via the software.The photovoltaic meter has two different measuring functions for determining the characteristics of a solar module. In the automatic mode, the characteristic curve is created with automatic parameters by the photovoltaic meter. This gives the operator a first impression of the state of the solar module. In manual mode, the start and end of the current value can be set on the photovoltaic meter. If the area of the solar module and the power of the incoming radiation are stored in W/m², the photovoltaic meter can calculate the efficiency and the fill factor of the cell. Another measuring function with the solar module tester is the one-point measurement. A specific current can be controlled and checked by the photovoltaic meter.The LCD display of the photovoltaic meter has a size of 4.8"". This means that the characteristic curve and all measured values can be read off at the same time. In order to analyze the characteristic curve better, each individual measuring point on the photovoltaic meter can be approached. For a different view of the X and Y axes, you can switch between current, voltage and power by pressing a button on the photovoltaic meter.Because of its many different functions, the radiation detector is the ideal measuring device to examine solar modules for their effectiveness. The radiation detector is therefore used in photovoltaic systems and research facilities for the further development of solar modules.PCE-SPM 1The solar meter for solar energy is the ideal handheld test device for solar engineers, architects and hobby solar technicians. With this solar measuring device you can determine the solar power. This enables a statement to be made about the composition and design of a photovoltaic system. The light intensity is measured using a monocrystalline silicon solar cell. The processor integrated in the solar measuring device ensures automatic correction to maintain the basic accuracy after each device has been calibrated in the solar simulator. The most important parameter P tot (in W/m²) can be read directly on the display.The data contained in the internal memory (32,000 measured values) can be transferred to the serial interface of a PC using the software. This solar meter was also designed for outdoor use and has a weatherproof plastic housing. Its compact dimensions allow comfortable one-hand operation.1. Solar direct measurement on siteThe solar measuring device can be used to measure the energy directly at a defined position. These measured values can include can be used to check the efficiency of PV modules or solar thermal systems.2. Simulation of temperature, power, voltage and current of PV modulesAttention: only possible in combination with the multimeter we offer.3. Long term measurementsThe solar measuring device is equipped with an internal data logger for measurements over longer periods of time.Solar radiationThe solar measuring device detects the full solar radiation, i.e. both the direct radiation and the diffuse solar radiation of the atmosphere. Most of the energy in solar radiation that is reflected on the surface of the earth is in the infrared visible strip of the spectrum, as ultraviolet radiation is absorbed by the atmosphere. The solar radiation varies over the year because the angle of the incident light rays is larger in summer than in winter and the rays are more perpendicular in summer.Features:Photovoltaic meter PCE-PVA 100Data memory for 100 measurementsMeasuring range 0 ... 12 A DCThree different test functionsPC interface for data transferSwitchable graphic viewSolar measuring device PCE-SPM 1Enables on-site measurement of the solar power yield / irradiation P totEnables long-term measurement via the internal measured value memory (32,000)Transmission and evaluation software included in the scope of delivery (in English)Enables comparative solar measurementMin, max and data hold functionPower supply by 4 Li-ion batteries (service life approx. 16 days with continuous use)Includes:1 x Photovoltaic meter PCE-PVA 1001 x Solar measuring device PCE-SPM 11 x Optical USB cable1 x Battery1 x Software CD2 x Kelvin clamps2 x Safety measuring lines (100 mm)1 x Mains power adapter1 x Internal sensor1 x Internal measured value memory1 x RS-232 PC cable1 x Software4 x Battery1 x Device bag1 x Instruction manual
Price now:
From
$1,862.90
To
$1,881.10
Selectum LLC
0.00% (~ $$v)
New
$1,862.90
$2,055.00
Selectum LLC
0.00% (~ $$v)
New
$1,881.10
Selectum LLC | $1,862.90Free Delivery | Store |
Selectum LLC | $1,881.10Free Delivery | Store |
Product Description
PCE-PVA 100The photovoltaic meter is a useful tool to examine solar cells for their characteristics. With a DC voltage range of 0… 60V and a DC current range of 0… 12 A, the photovoltaic meter covers a large number of solar modules. The determined characteristic curves are saved directly on the solar module tester. Up to 100 measurements can be stored in the data memory of the photovoltaic meter. The stored measured values can then be read out and further processed on a PC with the associated software. In addition, it is possible to operate the photovoltaic meter completely via the software.The photovoltaic meter has two different measuring functions for determining the characteristics of a solar module. In the automatic mode, the characteristic curve is created with automatic parameters by the photovoltaic meter. This gives the operator a first impression of the state of the solar module. In manual mode, the start and end of the current value can be set on the photovoltaic meter. If the area of the solar module and the power of the incoming radiation are stored in W/m², the photovoltaic meter can calculate the efficiency and the fill factor of the cell. Another measuring function with the solar module tester is the one-point measurement. A specific current can be controlled and checked by the photovoltaic meter.The LCD display of the photovoltaic meter has a size of 4.8"". This means that the characteristic curve and all measured values can be read off at the same time. In order to analyze the characteristic curve better, each individual measuring point on the photovoltaic meter can be approached. For a different view of the X and Y axes, you can switch between current, voltage and power by pressing a button on the photovoltaic meter.Because of its many different functions, the radiation detector is the ideal measuring device to examine solar modules for their effectiveness. The radiation detector is therefore used in photovoltaic systems and research facilities for the further development of solar modules.PCE-SPM 1The solar meter for solar energy is the ideal handheld test device for solar engineers, architects and hobby solar technicians. With this solar measuring device you can determine the solar power. This enables a statement to be made about the composition and design of a photovoltaic system. The light intensity is measured using a monocrystalline silicon solar cell. The processor integrated in the solar measuring device ensures automatic correction to maintain the basic accuracy after each device has been calibrated in the solar simulator. The most important parameter P tot (in W/m²) can be read directly on the display.The data contained in the internal memory (32,000 measured values) can be transferred to the serial interface of a PC using the software. This solar meter was also designed for outdoor use and has a weatherproof plastic housing. Its compact dimensions allow comfortable one-hand operation.1. Solar direct measurement on siteThe solar measuring device can be used to measure the energy directly at a defined position. These measured values can include can be used to check the efficiency of PV modules or solar thermal systems.2. Simulation of temperature, power, voltage and current of PV modulesAttention: only possible in combination with the multimeter we offer.3. Long term measurementsThe solar measuring device is equipped with an internal data logger for measurements over longer periods of time.Solar radiationThe solar measuring device detects the full solar radiation, i.e. both the direct radiation and the diffuse solar radiation of the atmosphere. Most of the energy in solar radiation that is reflected on the surface of the earth is in the infrared visible strip of the spectrum, as ultraviolet radiation is absorbed by the atmosphere. The solar radiation varies over the year because the angle of the incident light rays is larger in summer than in winter and the rays are more perpendicular in summer.Features:Photovoltaic meter PCE-PVA 100Data memory for 100 measurementsMeasuring range 0 ... 12 A DCThree different test functionsPC interface for data transferSwitchable graphic viewSolar measuring device PCE-SPM 1Enables on-site measurement of the solar power yield / irradiation P totEnables long-term measurement via the internal measured value memory (32,000)Transmission and evaluation software included in the scope of delivery (in English)Enables comparative solar measurementMin, max and data hold functionPower supply by 4 Li-ion batteries (service life approx. 16 days with continuous use)Includes:1 x Photovoltaic meter PCE-PVA 1001 x Solar measuring device PCE-SPM 11 x Optical USB cable1 x Battery1 x Software CD2 x Kelvin clamps2 x Safety measuring lines (100 mm)1 x Mains power adapter1 x Internal sensor1 x Internal measured value memory1 x RS-232 PC cable1 x Software4 x Battery1 x Device bag1 x Instruction manual
Product Specifications
General | |
|---|---|
Color | light |
Material | mode/plastic |
Size | extra large |
Brand | PCE-PVA 100-SPM 1-KIT |
Delivery, Returns & Refunds
Delivery
Sellers offer a range of delivery options, so you can choose the one that’s most convenient for you. Many sellers offer free delivery. You can always find the postage cost and estimated delivery date in a seller’s listing. You'll then be able to see a full list of delivery options during checkout. These can include: Express delivery, Standard delivery, Economy delivery, Click & Collect, Free local collection from seller.
Returns
Your options for returning an item vary depending on what you want to return, why you want to return it, and the seller's return policy. If the item is damaged or doesn't match the listing description, you can return it even if the seller's returns policy says they don't accept returns. If you've changed your mind and no longer want an item, you can still request a return, but the seller doesn't have to accept it. If the buyer changes their mind about a purchase and wants to return an item, they may need to pay return postage costs, depending on the seller's return policy. Sellers can provide a return postage address and additional return postage information for the buyer. Sellers pay for return postage if there's a problem with the item. For example, if the item doesn't match the listing description, is damaged or defective or is counterfeit. By law, customers in the European Union also have the right to cancel the purchase of an item within 14 days beginning from the day you receive, or a third party indicated by you (other than the carrier) receives, the last good ordered by you (if delivered separately). This applies to all products except for digital items (e.g. Digital Music) that are provided immediately to you with your acknowledgment, and other items such as video, DVD, audio, video games, Sex and Sensuality products and software products where the item has been unsealed.
Refunds
Sellers have to offer a refund for certain items only if they are faulty, such as: Personalized items and custom-made items, Perishable items, Newspapers and magazines, Unwrapped CDs DVDs and computer software. If you used your PayPal balance or bank account to fund the original payment, the refunded money will go back to your PayPal account balance. If you used a credit or debit card to fund the original payment, the refunded money will go back to your card. The seller will effect the refund within three working days but it may take up to 30 days for Paypal to process the transfer. For payments funded partially by a card and partially by your balance/bank, the money taken from your card will go back to your card and the remainder will return to your PayPal balance.